| 7″ Mitsubishi Touch screen HMIs GS21 Simple | GS2110-WTBD | GS2107-WTBD |
| Display Device | TFT color LCD |
| Screen Size | 10″ | 7″ |
| Resolution | 800 x 480 dots |
| Display Size(W x H) mm (inch) | 222 x 132.5 (8.74 x 5.22) (Horizontal format) | 154 x 85.9 (6.06 x 3.38) (Horizontal format) |
| Number of Characters | 16-dot standard font: 50 chars. x 30 lines (2-byte) (Horizontal format) |
| Display Color | 65536 colors |
| Backlight | LED (not replaceable) Backlight off/screen saving time can be set |
| Touch Panel Type | Analog resistive film |
| Key Size | Minimum 2 x 2 dots (per key) |
| Simultaneous Press | Simultaneous press prohibited (only 1 point can be pressed) |
| Life | 1 million times (operating force 0.98N or less) |
| Memory C Drive | Flash memory (internal) (9MB), for storing project data, OS Life (No. of writings) 100000 times |
| Built-in Interface RS-422 | RS-422, 1chTransmission speed: 115200/57600/38400/19200/9600/4800bps Connector shape: D-Sub 9pin (female)Application: For communication with controllers Terminating resister: 330 Ω fixed |
| RS-232 | RS-232, 1chTransmission speed: 115200/57600/38400/19200/9600/4800bps Connector shape: D-Sub 9pin (male)Application: For communication with controllers and a barcode readerFor connecting a personal computer (Project data read/write, FA transparent function) |
| Ethernet | Data transfer method: 100BASE-TX, 10BASE-T, 1ch Connector shape: RJ-45 (modular jack) Application: For communication with controllersFor connecting a personal computer (Project data read/write, FA transparent function) |
| USB | USB (Full Speed 12Mbps), 1ch Connector shape: Mini-BApplication: For connecting a personal computer (Project data read/write, FA transparent function) |
| SD Card | SD compliant, 1chSupported memory card: SDHC memory card, SD memory card Application: Project data read/write, logging data save |
| Buzzer Output | Single tone (LONG/SHORT/OFF adjustable) |
| Protective Structure | IP65F (Only the front part of the panel) |
| Ext. Dimensions (W x H x D) mm (inch) | 272 x 214 x 56 (10.71 x 8.43 x 2.21) | 206 x 155 x 50 (8.11 x 6.11 x 1.97) |
| Weight (Excl. Mounting Brackets) (kg) | 1.3 | 0.9 |
| Compatible Software Package | GT Designer3 Version1.105K or later (*1) (English Version) |
| Mitsubishi touch screen HMI GS21 Power Supply | GS2110-WTBD | GS2107-WTBD |
| Power Supply Voltage | 24VDC (+10%, -15%), ripple voltage 200mV or less |
| Power Consumption | 7.6W (317mA/24V) or less | 6.5W (271mA/24V) or less |
| With Backlight Off | 3.8W (158mA/24V) or less | 3.8W (158mA/24V) or less |
| Inrush Current | 17A or less (6ms, ambient temperature 25, maximum load) |
| Allowable Momentary Power Failure Time | Within 5ms |
| Noise Immunity | Conforms to IEC61000-4-4, 2kV (power supply line) |
| Withstand Voltage | 350VAC for 1 minute between power supply and ground |
| Insulation Resistance | 10MΩ or higher with an insulation resistance tester (500VDC between power supply terminal and ground) |
